[Errors]
600=An operation is pending.
601=The port handle is invalid.
602=The port is already open.
603=Caller's buffer is too small.
604=Wrong information specified.
605=Cannot set port information.
606=The port is not connected
607=The event is invalid.
608=The device does not exist.
609=The device type does not exist.
610=The buffer is invalid.
611=The route is not available.
612=The route is not allocated.
613=Invalid compression specified.
614=Out of buffers.
615=The port was not found.
616=An asynchronous request is pending.
617=The port or device is already disconnecting.
618=The port is not open.
619=The port is disconnected.
620=There are no endpoints.
621=Cannot open the phone book file.
622=Cannot load the phone book file.
623=Cannot find the phone book entry.
624=Cannot write the phone book file.
625=Invalid information found in the phone book file.
626=Cannot load a string.
627=Cannot find key.
628=The port was disconnected.
629=The data link was terminated by the remote machine.
630=The port was disconnected due to hardware failure.
631=The port was disconnected by the user.
632=The structure size is incorrect.
633=The port is already in use or is not configured for Remote Access dial out.
634=Cannot register your computer on on the remote network.
635=Unknown error.
636=The wrong device is attached to the port.
637=The string could not be converted.
638=The request has timed out.
639=No asynchronous net available.
640=A NetBIOS error occurred.
641=The server cannot allocate NetBIOS resources needed to support the client.
642=One of your NetBIOS names is already registered on the remote network.
643=A network adapter at the server failed.
644=You will not receive network message pop-ups.
645=Internal authentication error.
646=The account is not permitted to log on at this time of day.
647=The account is disabled.
648=The password has expired.
649=The account does not have Remote Access permission.
650=The Remote Access server is not responding.
651=Your modem (or other connecting device) has reported an error.
652=Unrecognized response from the device.
653=A macro required by the device was not found in the device .INF file section.
654=A command or response in the device .INF file section refers to an undefined acro.
655=The <message macro was not found in the device .INF file secion.
656=The <defaultoff macro in the device .INF file section contains an undefined macro.
657=The device .INF file could not be opened.
658=The device name in the device .INF or media .INI file is too long.
659=The media .INI file refers to an unknown device name.
660=The device .INF file contains no responses for the command.
661=The device.INF file is missing a command.
662=Attempted to set a macro not listed in device .INF file section.
663=The media .INI file refers to an unknown device type.
664=Cannot allocate memory.
665=The port is not configured for Remote Access.
666=Your modem (or other connecting device) is not functioning.
667=Cannot read the media .INI file.
668=The connection dropped.
669=The usage parameter in the media .INI file is invalid.
670=Cannot read the section name from the media .INI file.
671=Cannot read the device type from the media .INI file.
672=Cannot read the device name from the media .INI file.
673=Cannot read the usage from the media .INI file.
674=Cannot read the maximum connection BPS rate from the media .INI file.
675=Cannot read the maximum carrier BPS rate from the media .INI file.
676=The line is busy.
677=A person answered instead of a modem.
678=There is no answer.
679=Cannot detect carrier.
680=There is no dial tone.
681=General error reported by device.
682=ERROR_WRITING_SECTIONNAME
683=ERROR_WRITING_DEVICETYPE
684=ERROR_WRITING_DEVICENAME
685=ERROR_WRITING_MAXCONNECTBPS
686=ERROR_WRITING_MAXCARRIERBPS
687=ERROR_WRITING_USAGE
688=ERROR_WRITING_DEFAULTOFF
689=ERROR_READING_DEFAULTOFF
690=ERROR_EMPTY_INI_FILE
691=Access denied because username and/or password is invalid on the domain.
692=Hardware failure in port or attached device.
693=ERROR_NOT_BINARY_MACRO
694=ERROR_DCB_NOT_FOUND
695=ERROR_STATE_MACHINES_NOT_STARTED
696=ERROR_STATE_MACHINES_ALREADY_STARTED
697=ERROR_PARTIAL_RESPONSE_LOOPING
698=A response keyname in the device .INF file is not in the expected format.
699=The device response caused buffer overflow.
700=The expanded command in the device .INF file is too long.
701=The device moved to a BPS rate not supported by the COM driver.
702=Device response received when none expected.
703=The Application does not allow user interaction the connection requires interaction with the user to complete successfully
704=ERROR_BAD_CALLBACK_NUMBER
705=ERROR_INVALID_AUTH_STATE
706=ERROR_WRITING_INITBPS
707=X.25 diagnostic indication.
708=The account has expired.
709=Error changing password on domain The password may be too short or may match a previously used password.
710=Serial overrun errors were detected while communicating with your modem.
711=RasMan initialization failure Check the event log.
712=Biplex port initializing Wait a few seconds and redial.
713=No active ISDN lines are available.
714=No ISDN channels are available to make the call.
715=Too many errors occurred because of poor phone line quality.
716=The Remote Access IP configuration is unusable.
717=No IP addresses are available in the static pool of Remote Access IP addresses.
718=Timed out waiting for a valid response from the remote PPP peer.
719=PPP terminated by remote machine.
720=No PPP control protocols configured.
721=Remote PPP peer is not responding.
722=The PPP packet is invalid.
723=The phone number including prefix and suffix is too long.
724=The IPX protocol cannot dial-out on the port because the machine is an IPX router.
725=The IPX protocol cannot dial-in on the port because the IPX router is not installed
726=The IPX protocol cannot be used for dial-out on more than one port at a time.
727=Cannot access TCPCFG.DLL.
728=Cannot find an IP adapter bound to Remote Access.
729=SLIP cannot be used unless the IP protocol is installed.
730=Computer registration is not complete.
731=The protocol is not configured.
732=The PPP negotiation is not converging.
733=The PPP control protocol for this network protocol is not available on the server.
734=The PPP link control protocol terminated.
735=The requested address was rejected by the server.
736=The remote computer terminated the control protocol.
737=Loopback detected.
738=The server did not assign an address.
739=The authentication protocol required by the remote server cannot use the Windows NT encrypted password Redial, entering the password explicitly.
740=Invalid TAPI configuration.
741=The local computer does not support the required encryption type.
742=The remote computer does not support the required encryption type.
743=The remote computer requires encryption.
744=Cannot use the IPX network number assigned by remote server Check the event log.
745=ERROR_INVALID_SMM
746=ERROR_SMM_UNINITIALIZED
747=ERROR_NO_MAC_FOR_PORT
748=ERROR_SMM_TIMEOUT
749=ERROR_BAD_PHONE_NUMBER
750=ERROR_WRONG_MODULE
751=Invalid callback number Only the characters 0 to 9, T, P, W, (, ), -, @, and space are allowed in the number.
752=A syntax error was encountered while processing a script.
753=The connection could not be disconnected because it was created by the Multi-Protocol Router.